GE 21018 User Manual

Page 14

Advertising
background image

14

NOTE:

While in room monitoring mode, the originating handset can be

switched to monitor by speaker mode by pressing the SPKR button once.
Switch back to earpiece by pressing the TALK/END/CALLBACK button once.

NOTE:

Press the *EXIT button on the handset to exit room monitor mode.

H

ANDSET

S

ETUP

1. Make sure your phone is OFF (not in talk mode).

2. Press the MUTE/PROG button to go to the main menu.

3. Press CID/VOL (/\ or V) button to scroll to HANDSET SETUP.

4. Press MUTE/PROG button to confirm and you may program the

following items:

Language, Handset Name, Ringer Tone, Ringer Volume, VIP Melody, Key
Tone ON/OFF, Area Code, Registration, Deregistration and Default Setting.

During programming, you may press the *EXIT button at any time to exit
the menu and return to the sub-menu.

Make sure your phone is OFF (not in talk mode)

L

ANGUAGE

1. Press the CID/VOL (/\ or V) button to scroll to the SET LANGUAGE menu.

2. Press MUTE/PROG button to enter the menu.

SET LANGUAGE 1ENG

2FRA 3ESP

shows in the display.

3. Use the touch tone pad on the handset to select 1ENG, 2FRA, 3ESP, or

use the CID/VOL (/\ or V) button to scroll to the desired language.
English is the default setting.

4. Press the MUTE/PROG button to save your selection. You will hear a

confirmation tone and the selected language shows in the display.

H

ANDSET

N

AME

1. Press the CID/VOL (/\ or V) button to scroll to the HANDSET NAME menu.

2. Press MUTE/PROG button to enter the menu.

HANDSET NAME

shows in

the display.

Advertising