GE 21018 - Manual (Page 18)

18
3. Use the touch tone pad on the handset to select 1 or 2, or use the CID/
VOL (/\ or V) button to scroll to your selection. 1ON is the default setting.
4. Press the MUTE/PROG button to confirm and the key tone setting shows
in the display.
R
EGISTRATION
This setting may be made with the handsets only. Your dual handsets are
pre-registered and ready to use. It is not recommended that handset be
registered again unless absolutely necessary.
1. If necessary, press the MUTE/PROG button to go to the REGISTRATION
menu. The default is 2 NO.
2. Use the touch-tone pad to select 1 for YES or 2 for NO. Or use the CID/
VOL (/\ or V) button to scroll to 1 YES or 2 NO.
3. If you select 1 YES, press the MUTE/PROG button to confirm your
selection. HOLD BASE PAGE WAIT FOR BEEP shows in the display.
4. Press and hold the page button on the base unit until you hear a long
tone at the handset. HANDSET X REGISTERED shows in the handset
display, where X is the handset name. You will hear a confirmation tone.
D
E
-R
EGISTRATION
This setting may be made with the handsets only. De-registration
cancels registration. During the de-registration process, keep the
handset near the base.
1. If necessary, press the MUTE/PROG button to scroll to the
DEREGISTRATION menu. The default is 2 NO.
2. Use the touch-tone pad to select 1 for YES or 2 for NO. Or use the CID/
VOL (/\ or V) button to scroll to 1 YES or 2 NO.
WARNING: It is not recommended that a handset be de-registered unless
absolutely necessary because once a handset is de-registered, that handset's
telephone features cannot be used until the handset is re-registered.
3. Select NO, if you do not want to de-register.