GE 21018 User Manual
Page 19
19
4. If you select 1 YES, press the MUTE/PROG button and
MOVE NEAR TO
BASE
displays for 2 seconds, then
CONFIRM? 1 YES 2 NO
appears in the
display.
5. Press the touch-tone pad to select
1 YES
or
2 NO
, or use the CID/VOL (/\
or V) button to scroll to
1 YES
or
2 NO
.
6. If you select YES, press the MUTE/PROG button to confirm. You will hear
a confirmation tone. Then
HANDSET X DEREGISTERED
shows in the
display to confirm the handset is deregistered.
NOTE:
When you complete the de-registration process, “HANDSET NEEDS
REGISTRATION” shows in the display. To use the handset, you must register
the handset.
G
LOBAL
D
E
-
REGISTRATION
If one or more handsets becomes lost, you should de-register all handsets
to ensure proper system operation. Follow the steps below to de-register
both handsets at the same time.
WARNING:
It is not recommended that a handset be de-registered unless
absolutely necessary because once a handset is de-registered, that handset's
telephone features cannot be used until the handset is re-registered.
1. Press and hold the page button on the base until the IN USE/CHARGE
indicator on the base flashes.
2. Press and hold the page button on the base again until the IN USE/
CHARGE indicator on the base flashes rapidly.
3. Press and release the page button on the base once. All handsets are de-
registered and
HANDSET NEEDS REGISTRATION
shows in the display.
D
EFAULT
S
ETTING
As you become familiar with this system, you may prefer to use the
system’s original settings. Follow the steps below to return to the factory
default settings.
1. Press the CID/VOL (/\ or V) button to scroll to the DEFAULT SETTING menu.