GE 21018 User Manual
Page 37
37
NEW CALL XX
XX represents the number of new CID records
not reviewed.
Low Battery
Indicates the battery needs to be charged.
LONG DISTANCE
Indicates CID record is from a long distance call.
H
ANDSET
S
OUND
S
IGNALS
Signal
Meaning
A long warbling tone (with ringer on)
Signals an incoming call
Three short beeps
Page signal
One short beep (every 7 seconds)
Low battery warning
T
ROUBLESHOOTING
G
UIDE
T
ELEPHONE
S
OLUTIONS
No dial tone
• Check or repeat installation steps:
Make sure the base power cord is connected to a working
electrical outlet.
Make sure the telephone line cord is connected to the base and the
wall jack.
• Connect another phone to the same jack. If it doesn’t work, the problem
might be your wiring or local service.
• The handset may be out of range of the base. Move closer to the base
• Make sure the battery is properly charged (for 16 hours).
• Make sure the battery pack (in the handset) is properly installed.
• The handset should beep when you press the TALK/END/CALLBACK
button, and the charge indicator on the base should be lit when the
handset rests in the cradle. If not, the battery may need to be charged.
• Place handset in charge cradle for at least 20 seconds to reset the unit.