GE 21018 - Manual (Page 23)

23
2. Press and release the PAGE/INT button on a handset. P AGING
EXTENSION? shows in the display.
3. Use the touch-tone pad to enter the handset number you want to page.
4. To cancel the page, press the *EXIT button.
P
AGING
A
LL
H
ANDSETS FROM A
H
ANDSET
1. Make sure the originating phone is OFF (not in talk mode).
2. Press and release the PAGE/INT button on a handset. PAGING
EXTENSION? shows in the display.
3. Use the touch-tone pad to enter the handset number you want to page. (1=
to page Handset 1, 2=to page handset 2, etc., and 5=to page all handsets)
4. To cancel the page, press the *EXIT or PAGE/INT button. On the
originating handset, you may press TALK/END/CALLBACK.
P
AGING FROM THE
B
ASE
/G
ROUP
P
AGE
Use the base-only to page both registered handsets at the same time.
1. Press the page button on the base. All handsets beep for two minutes,
and PAGING FROM BASE shows on each handset’s display.
2. To cancel the page, press the page button on the base, or press the
TALK/END/CALLBACK button or the *EXIT button on each handset.
M
UTE
To have a private, off-line conversation, use the MUTE feature. The party
on the telephone line cannot hear you, but you can hear them.
1. Press the MUTE/PROG button. The handset display shows MUTE ON .
2. Press the MUTE/PROG button to cancel and return to your phone conversation.
R
ECEIVER
V
OLUME
C
ONTROL
When the handset is ON (in talk mode) you may adjust the receiver volume
by pressing the CID/VOL (/\ or \/) button. There are four volume levels to
choose from. When the maximum or minimum volume level is reached, the
phone beeps twice. VOL 1 is minimum and VOL 4 is maximum.
D
O
N
OT
D
ISTURB
(DND)
DND allows you to mute the ringer of the handset.