Gateway AD-520 - Manual (Page 28)

22
Chapter 2: Connecting Your DVD Player
www.gateway.com
2
Connect the AC-3 toslink digital audio jack on the back of your DVD player
to the AC-3 toslink digital audio in jack on your receiver.
-OR-
Connect the coaxial out jack on the back of your DVD player to the coaxial
in jack on your receiver.
3
Connect your receiver to the television. For more information, see the
user’s guides that came with your receiver and television.
4
Plug the power cord into a wall outlet.
Important You need to configure the DVD player for digital audio
output. For more information, see
“Audio Setup” on
page 57 .
You may also need to configure your receiver for digital
audio input. For more information, see the user’s guide that
came with your receiver.