Gateway AD-520 - Manual (Page 52)

46
Chapter 3: Using the DVD Player
www.gateway.com
Clearing programmed tracks
To clear the programmed tracks one by one:
■ During programming, press C LEAR .
Each time this button is pressed, the programmed tracks are cleared one
by one in the opposite order. Once you have played the tracks, you cannot
clear the programmed tracks one by one.
To clear all programmed tracks:
■ During programming or after pressing (stop), press P.M ODE . All
programmed tracks are cleared.
Caution Opening the disc tray or turning off the power clears all
programmed tracks.