Geemarc BDP400 - Manual (Page 19)

18
Time setting
If you subscribe to a Caller Display service, the date and
time will be set whenever you receive a call. However, if
you do not subscribe to this service, you will need to set
the date and time manually.
To set the time and date, press the "Menu" button to enter
the menu. The display will show and announce the word
"Store". Press either the "
" or " " button until you reach
"Setting" and press the "Ok" button. Press either the " "
or " " button until you reach "TIME" on the display and
the telephone will say: "Set Time/date", and press the "Ok"
button. The telephone will say: "Set hours" and the hour
digits on the display will flash. Press either the "
" or " "
button to toggle through the hours (each of which will be
shown and announced), and press "Ok" button to confirm.
The telephone will then say: "Set minutes" and the minute
digits on the display will flash. Press either the "
" or " "
button to toggle through the minutes (each of which will be
shown and announced), and press "Ok" button to confirm.
While setting the time the words SET TIME will be shown
on the bottom of the display.
The telephone will then say: "Set day" and the date
number digits on the display will flash. Press either the
"
" or " " button to toggle through the day in numbers
between 1-31 (each of which will be shown and
announced), and press "Ok" button to confirm when set.
Settings
OPERATION