Geemarc BDP400 - Manual (Page 9)

8
last number dialled (stored in the memory). The button on
the right of this row has a red LED situated at the top edge
of the button and has the word Headset below it. This is the
"Headset" button, which should be pressed to activate the
telephone when making a call using a headset. The headset
should be plugged into the top edge of the telephone.
The last few buttons on the front of the telephone are
situated on the right towards the edge. Towards the top of
the telephone are three circular-shaped buttons, one above
the other. Above these buttons are the letters Mem, and
these are the three quick-dial memory buttons. The top
button (memory one - M1) has one tactile dot on it, the
middle button (memory two - M2) has two tactile dots on it,
and the bottom of the three buttons (memory three - M3)
has three tactile dots on it. Once a telephone number is
programmed to one of these three buttons it can be dialled
instantly by just pressing the button.
Third Memory key labeled CS with the 3 dots is pre
programmed with the Sonic Alert/ Geemarc customer service
number. For customer service help or technical questions
press this key to dial customer service.
Directly below the third memory button is slightly larger
round button with clock hands and markings at 12, 3, 6 and
9 o'clock positions. This button when pressed will tell you
the time and date.
Below this button is the speaker button, and has a symbol of
a speaker on it " ". It is used when you want to make
hands-free calls. There is a small, red, LED light at the top
of this button.
Front
ORIENTATION