Geemarc BDP400 - Manual (Page 24)

23
Making a call - hands-free
Dial the number on the keypad in the on-hook position.
Use the "C" button if necessary to cancel any digit input
incorrectly.
Press the " " button and the number will be dialled
automatically. The hands-free function (speaker) will now
be activated and the LED indicator light on the button will
be illuminated.
When the third party answers the call, you may speak with
the telephone in the hands-free mode (handset in the
cradle). Speak towards the microphone located on the
front edge of the telephone.
To end the call, press the " " button.
Please note: To deactivate the hands-free function during
a call, lift the handset. To activate the hands-free function
during the call, press the " " button and replace the
handset on the cradle at the same time.
Please note: When in hands-free mode, only one person
may talk at a time. The switch-over between speaker and
microphone is automatic. This is dependent on the sound
level of the incoming call and the microphone respectively.
It is therefore essential that there are no loud noises, e.g.
music, in the immediate vicinity of the telephone, as this
will disrupt the hands-free function.
OPERATION
Using the telephone