Front, Orientation – Geemarc BDP400 User Manual

Page 7

Advertising
background image

6

Front

With the front of the telephone facing towards you, you will

notice that there is a large LCD display towards the top end

of the telephone. This display is almost the same width as

the telephone and can be moved backwards and forwards

from a horizontal position to a vertical stance of about 90-

degrees. The display can be felt as it is slightly recessed

from the outer case. Towards the top right corner of the

display you will feel a small, raised, circular shape. This is a

red LED light that flashes when a new call has been

received (but only if you have subscribed to the Caller

Display service from your network provider).

The specific details of the LCD display and what is shown is

covered in more detail below, under Orientation: Display.

On the left of the telephone is the handset, and underneath

this is the speaker. Just below the top part of the telephone

cradle is a small hook. This can be rotated either clockwise

or anti-clockwise, and should be turned 180-degrees if

intending to wall mount the telephone. One

part of the hook is flat to touch and this should be used

(facing towards top of telephone) in regular use. The hook

should be rotated so the rounded edge is facing towards top

of the telephone for wall mounting use. This will ensure that

the handset stays in place when wall mounted.

The remaining space on the front of the telephone is

covered by function buttons. Towards the top edge of the

telephone, just below the LCD display, are a series of

buttons in close proximity. This will be referred to as row one.

On the left (at the top) is a round button with the letter C on

it (which is also tactile). This is the "Delete" button. To the

Front

ORIENTATION

Advertising