GE Calibur CBR-PB3-WD - Manual (Page 27)

Kalatel CBR-PB3-WD 27 0150-0261A
10.2 Setting up the ProBridge for
HyperTerminal Operation
1. Start HyperTerminal and open a new Connection (FILE>NEW):
Give the connection a name and select
an Icon.
Click OK.
2. Under “Connect Using” option
select “COM1”.
3. The Com1 Properties menu will
appear. Select the following
settings to complete the setup:
a. Bits per Second = 19200
b. Data Bits = 8
c. Parity = None
d. Stop Bits = 1
e. Flow Control = None
4. Power up the ProBridge unit by
plugging in the power supply.