GE Calibur CBR-PB3-WD - Manual (Page 29)

Kalatel CBR-PB3-WD 29 0150-0261A
NOTE
3. Setup Option 2 (Port #2)
Port #2 is an RS-232 port that connects the PB3 unit to the Receipt Printer
Interconnect Cable. The settings will vary based upon the type of Receipt
Printer in use.
Once you have selected this option, there will be multiple selections
available for each element. Entering the number for the element will switch
to the next option for that element. Continue to enter the same element
number until the desired entry appears.
The menu options are presented similar to the following screen:
a. Menu Selection 2 – Protocol Options
q Asynchronous
RS-232 Options
1. Main Menu
2. Protocol: Async
3. Baud Rate: 9600
4. Parity: None
5. Mode: 1-stop
6. Code: 8-Bit ASCII
7. Device: Wayne Dresler
To return to the Main Menu at any time press “1” and
hit “Enter”