GE Calibur CBR-PB3-WD - Manual (Page 5)

Kalatel CBR-PB3-WD 5 0150-0261A
1 CBR-PB3-WD ProBridge
1.1 Kalatel CBR-PB3-WD Description
The Kalatel CBR-PB3-WD is a specific ProBridge unit for interfacing the DVMRe
family of digital video multiplex/recorders Wayne Plus Receipt Printers (WP/RJ).
One CBR-PB3-WD is required per cash register. Where multiple cash registers
are connected to a single DVMRe unit, the individual CBR-PB3-WD’s are
interconnected via the PB3’s built-in RS-485 network.
1.2 Additional Equipment Provided by the
Installer
Installations requiring multiple CBR-PB3-WD units are interconnected via the
unit’s built-in RS-485 network, the installer will need to provide suitable length
RS-485 cable terminated with RJ-45 connectors.
1.3 Compatibility
The CBR-PB3-WD is compatible with the following DVMRe products:
DVMRe Type Software Version PPC Version
DVMRe-CD/CS V 3.07 (and above) V 3.07 (and above)
DVMRe-eZ V 3.20 (and above) V 3.14 (and above)
DVMRe-CT (Triplex) V 4.0 (and above) N/A
DVMRe-eZT (Triplex) V 4.03 (and above) N/A
StoreSafe Advanced V 4.06 (and above) N/A
To verify the software version in your unit, either note the display which identifies
the version when the unit boots-up, or view the version information by clicking the
About box in the unit’s menu system.
1.4 Disclaimer
The Kalatel ProBridge components identified within this document provide means
of capturing transaction text/data for use by the DVMRe family of digital video
recording/transmission products. The ProBridge components translate the data
into a usable format by the DVMRe and permits associating transaction data with
specific cameras. Kalatel assumes no responsibility for the amount and type of
information available, the operation, non-operation or erroneous operation of the
customer provided equipment the ProBridge connects to.