GE Calibur CBR-PB3-WD - Manual (Page 32)

Kalatel CBR-PB3-WD 32 0150-0261A
gender changer is added to match the DB9M connector
needed for the port on the DVMRe-CD/CS.
ii. Modem must be configured for Port 1. The menu setup is:
Communications>RS-232>Port 1> POTS.
iii. The unit will have to be opened and a specific jumper
setting set to allow text insertion on RS-232/2 Port.
Contact Kalatel Tech Support for instructions on
configuring the PORT 2 for text insertion.
Transaction text is captured with video regardless of recording
mode (Time-Lapse, Time-Lapse+Event or Event only). If Time-
Lapse+Event or Event only recording modes must have at least
one second set for the pre-event duration.
Final Testing
After hooking up the Duplex or Simplex unit, have some POS transactions
generated. Allow sufficient time (2-3 minutes) before stopping recording and
performing a text search from the DVMRe-CD/CS unit. Search for events based
upon text and place a “*” in the text field and then select “Start Search”. All
captured Cash Register transactions will be displayed in the list.
NOTE