GE ZVB36 - Manual (Page 3)

3
Design Information
coNTeNTS
Design Information
Product Dimensions ................................................................3
Accessories..................................................................................3
Advance Planning ............................................................... 4, 5
Installation preparation
Clearances .............................................................................. 6, 7
Parts Supplied ............................................................................7
Tools and Materials Required .............................................7
Remove Packaging ..................................................................7
Power Supply .............................................................................8
Venting Options .........................................................................9 Ductwork
Duct Fittings ............................................................................. 10
Installation Instructions
Step 1, Install Downdraft Vent ......................................... 11
Step 2, Install the Ductwork .............................................. 11
Step 3, Install Control Switch ............................................ 12
Step 4, Connect Power ........................................................ 13
Step 5, Install Filters, Check Operation ........................ 13
Cleaning ..................................................................................... 13
pRoDucT DIMeNSIoNS
A b
30 " Models 30 " 28-5/16 "
36 " Models 36 " 33-15/16 "
AcceSSoRIeS
jXRb67 – Optional accessory for indoor remote
location of the blower/motor assembly. Use this kit
when the blower and motor assembly will be located
outside of the cabinet, such as below the cabinet floor.
jXbc67 – Optional outdoor cover accessory for remote
installation of blower and motor assembly on an
outside wall.