GE MULTILINK 1601-9026-A3 - Manual (Page 63)

QUICKSTART GUIDE
MULTILINK ETHERNET COMMUNICATIONS SWITCH – QUICKSTART GUIDE 59
Z Verify that the configuration file has been created and stored
correctly.
This completes the Save (original) Configuration procedure.
The following procedure describes how to upgrade the firmware:
Z Use the xmodem command:
ML800/1200/1600/2400# Xmodem get type=app
Do you wish to upgrade the image? [Y or N] Y
Z Select the Transfer menu item and choose the Send File option
Z Enter the location of the firmware file that has to be loaded into the
switch.
Z Select Xmodem as the protocol.