GE MULTILINK 1601-9026-A3 User Manual
Page 64
Advertising
60
MULTILINK ETHERNET COMMUNICATIONS SWITCH – QUICKSTART GUIDE
QUICKSTART GUIDE
Z
Click on the Send button.
The file will start to load as shown below.
Z
Once the file transfer is complete, reboot the switch using the
Reboot command, or by switching the power off then on.
ML800/1200/1600/2400# reboot
Proceed on rebooting the switch? [Y or N] Y
Rebooting now...
Z
Login to the switch and use the show version command to verify
the version.
ML800/1200/1600/2400# show version
Z
If necessary, upload the configuration file using the following
commands.
Z
Enter the xmodem command as shown below:
Advertising