Garmin GHP 10 User Manual
Product registration, Contact garmin
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- GHP™ 10 Marine Autopilot System Installation Instructions
- GHP 10 Package Contents and Tools Needed
- Installation Preparation
- Installation Procedures
- Installing the Pump (and Motor)
- Installing the Pump on an Unbalanced Cylinder Steering System
- Mounting the Pump
- Connecting the 2.0 L or the 1.2 L Pump to the Hydraulic Lines
- Operating the Shutoff Valve
- Connecting the Pump to the ECU
- Installing an Unbalanced Kit on a 1.2 L or 2.0 L Pump
- Adjusting and Calibrating the Unbalanced Valve
- Connecting the Legacy 2.1 L Pump to the Hydraulic Lines
- Connecting the Pump to the ECU
- Connecting the Compact 2.1 L Pump to the Hydraulic Lines
- Connecting the Pump to the ECU
- Configuring the Compact 2.1 L Pump for an Unbalanced-Cylinder Steering Configuration
- Installing the Electronic Control Unit (ECU)
- Installing the Course Computer Unit (CCU)
- Installing the Shadow Drive
- Wiring the GHP 10 to the Tachometer
- Installing the Alarm Buzzer
- Installing the GHC 10
- Making the Final Power Connections
- Bleeding the Hydraulic Steering System
- Installing the Pump (and Motor)
- Configuring the GHP 10
- Appendix