Grizzly G0705 - Manual (Page 39)

Model G0705 (Mfg. since 09/09)
-37-
g2861—face mill
g4051—carbide insert for face mill
this 2
1 /
2
" Face Mill accepts four carbide inserts
(not included). Comes with an r-8 arbor.
figure 49. g2861 Face Mill.
g9760—20-pc. 2 & 4 flute tin end mill set.
includes these sizes and styles in two and four
flute styles:
3 /
16
", 1 /
4
", 5 /
16
", 3 /
8
", 7 /
16
", 1 /
2
", 9 /
16
", 5 /
8
",
3 /
8
", 11 /
16
", and 3 /
4
".
figure 50. g9760 20-pC end Mill set.
g9765—9-pc. ball end mill set
Features 2 flute ball nose end mills. includes the
following sizes:
1 /
8
", 3 /
16
", 1 /
4
", 5 /
16
", 3 /
8
", 7 /
16
", 1 /
2
", 5 /
8
"
and 3 /
4
".
figure 51. g9765 9 pC. Ball end Mill set.
g5641—1-2-3 blocks
g9815—parallel set
h5556—edge finder set
figure 52. g5641 1-2-3 Blocks, g9815 parallel
set, and h5556 edge Finder set.
g5641
g9815
h5556
h8370—power feed for mills
if you want to get the most out of your mill, you
really need a power feed. this power feed comes
with everything required to start milling with exact
control. Comes supplied with a mounting bracket,
gear, auto-stop limit switch with moveable stop
pins, gear guard, and motor. specs: 0–140 rpM,
200 rpM rapid switch, 440 in/lb. maximum torque,
110v 60hz motor, 4:1 bevel drive gear.
figure 53. h8370 power Feed.