Setting the timer to record later, Through – GoVideo GV2020 User Manual
Page 22
20
Set the Hour the event will be recorded.
Set the Minute the event will be recorded.
Set AM/PM. Use the Up/Down buttons or press 1 for AM, 2 for PM.
Set the Deck on which the event will be recorded.
Set the number of Hours of the recording. You can select up to 9 hours
and 59 minutes.
Set the number of Minutes of the recording.
Set the Channel (or AV-IN) to record. For AV-IN, select channel 00.
Set the event Type. NRM (Normal) records one event one time only; use
it for a movie or football game, for example. DLY (Daily) records one
event at the same time every weekday; use it for soap operas or the
news. WKY (Weekly) records one event at the same time every week;
use it for a weekly series. Daily and weekly recordings begin on the date
set.
Set the recording Speed. Use the Up/Down buttons or press 1 for SP, 2
for LP, 3 for EP. See page 23 for an explanation of speeds.
▲
If desired, press Reset to return all selections in this menu to their
original settings and restart step
π
. You can do this at any time.
To be able to record Simulcast or SAP broadcasts, use the Audio Menu to
place the tuner in the appropriate mode. See page 24. When Simulcast is
active, “SC” will appear after the channel number in both the Timer
Recording Summary and the Timer Recording Menu.
▲
∫
Press Save to accept your settings and return to the Timer Recording
Summary. You can do this at any time.
OR
Press Escape to cancel any changes to this event and return to the Timer
Recording Summary. You can do this at any time.
You can now review the settings you have just programmed. To change any
settings, repeat steps
∏
through
∫
. You will not be able to change any
event that is in progress.
To erase an event, use the Up/Down buttons to highlight the event and
press Reset. If the event is in progress, it will immediately stop.
❻
Press Save or Escape to leave the Timer Recording Summary then press
Save or Escape again to exit the Main Menu.
≤
Insert a tape into Deck 1, Deck 2, or both, whichever the timer is
programmed to record on.
❺
1
2
STOP/EJECT
PLAY
REW
FWD
PAUSE
SOURCE
REC
STOP/EJECT
PLAY
REW
FWD
PAUSE
SOURCE
REC
DECK 1
DECK 2
TV
VIEW
TUNER
AV•IN
1
2
3
4
5
6
7
8
9
0
CH
POWER
TV/VCR
RESET
SAVE
ESC
MENU
CTR
UP
DOWN
NEXT
PREV
LCV
DSP
COPY
TAPE
▲
❺
Setting the Timer
to Record Later