GoVideo GV2020 - Manual (Page 24)

1: VIDEO MENU
2: AUDIO MENU
3: SET DATE AND TIME
4: TIMER RECORDING
5: CHANNEL/TUNER MENU
WHEN OK PUSH SAVE
MAIN MENU
Programming from the Remote Control and
VCR-2 Front Panel
You can do On-Screen Programming with the Remote Control or the Front
Panel. The Numeric buttons on the Remote Control offer the ease of direct
entry of menu selections.
If programming from the Front Panel, use Down to highlight your selection.
Use Next to change settings or choose the current (highlighted) selection.
In the Set Date and Time Menu and Timer Recording Menu, use Next to
highlight your selection and Down to change settings.
Main Menu
All other On-Screen Programming menus are accessed through the Main
Menu.
∂
Press Menu. The Main Menu will appear on your TV screen.
∑
Press the Numeric buttons to choose your selection (or use the Up/
Down buttons to highlight your selection and press Next to choose it).
The Video Menu is explained on the next page.
The Audio Menu is explained on page 24.
Set Date and Time is explained on page 25.
Timer Recording is explained on pages 19 - 21.
The Channel/Tuner Menu is explained on pages 26 - 27.
∏
Press Save or Escape to exit the Main Menu.
22
1 2
STOP/EJECT
PLAY
REW FWD PAUSE
SOURCE REC
STOP/EJECT
PLAY
REW FWD PAUSE
SOURCE REC
DECK 1 DECK 2
TV
VIEW
TUNER AV•IN
1 2 3 4 5
6 7 8 9 0
CH
POWER
TV/VCR
RESET
SAVE ESC MENU
CTR UP
DOWN
NEXT PREV
LCV
DSP
❷ ❸ ❶ ❷
COPY
TAPE
▲
On-Screen
Programming
Main Menu