GoVideo GV2020 - Manual (Page 29)

To add a channel to Channel Memory:
①
Follow steps
∂
and
∑
on the preceding page.
≠
Use the Numeric buttons to select on the VCR-2 the channel you wish to
add.
③
Use the Up/Down buttons to highlight Add.
④
Press Next to add the channel.
∞
Press Save or Escape to return to the Main Menu.
To delete a channel from Channel Memory:
①
Follow steps
∂
and
∑
on the preceding page.
≠
Use the Numeric buttons (or the Channel Up/Down buttons) to select
on the VCR-2 the channel you wish to delete.
③
Use the Up/Down buttons to highlight Delete.
④
Press Next to delete the channel.
∞
Press Save or Escape to return to the Main Menu.
To add all channels to Channel Memory:
①
Follow steps
∂
and
∑
on the preceding page.
≠
Use the Up/Down buttons to highlight Add All.
③
Press Next to add all the channels.
④
Press Save or Escape to return to the Main Menu.
Your Channel Up/Down buttons will now select every channel, whether
a signal is present or not.
To erase all the channels from Channel Memory:
①
Follow steps
∂
and
∑
on the preceding page.
≠
Use the Up/Down buttons to highlight Delete All.
③
Press Next to delete all the channels.
④
Press Save or Escape to return to the Main Menu.
Channel memory will now contain no channels. Your Channel Up/
Down buttons will have no effect until channels are added again.
On-Screen
Programming
Channel/Tuner Menu
27