GoVideo GV2020 - Manual (Page 27)

You must set your VCR-2 clock and calendar before using Timer Recording.
Your VCR-2 will accurately maintain its calendar up to December 31, 2090
once you have set the date and time, unless power is interrupted. The clock
must be reset after a power interruption.
∂
Press Menu. The Main Menu will appear on your TV screen.
∑
Press 3 to select Set Date and Time. The Set Date and Time Menu will
appear on your TV screen.
▲
From this point, you will not be able to change channels until you return
to the Main Menu.
▲
∏
Use Previous and Next to move from one selection to another. Use the
Numeric buttons (or the Up/Down buttons) to change the setting for
any selection.
Set the Month. January is 01, October is 10, etc.
Set the Year. Enter only the last two digits: 91, 92, 93, etc.
Set the Day.
Set the Hour.
Set the Minute.
Set AM/PM. Use the Up/Down buttons or press 1 for AM, 2 for PM.
▲
If desired, press Reset to return all entries to current time and continue
with step
∏
. You can do this at any time.
▲
π
Press Save to accept your settings and return to the Main Menu. You can
do this at any time.
OR
Press Escape to ignore any changes you have made and return to the
Main Menu. You can do this at any time.
▲
The current time and day will appear on the Front Panel Display. The
current time and date can also be seen on the On-Screen Display.
Use a preceding zero (0) before single digit entries or press Next after the
first digit.
▲
1 2
STOP/EJECT
PLAY
REW FWD PAUSE
SOURCE REC
STOP/EJECT
PLAY
REW FWD PAUSE
SOURCE REC
DECK 1 DECK 2
TV
VIEW
TUNER AV•IN
1 2 3 4 5
6 7 8 9 0
CH
POWER
TV/VCR
RESET
SAVE ESC MENU
CTR UP
DOWN
NEXT PREV
LCV
DSP
❹ ❸ ❶ ❷
COPY
TAPE
▲
❸
1: VIDEO MENU
2: AUDIO MENU
3: SET DATE AND TIME
4: TIMER RECORDING
5: CHANNEL/TUNER MENU
WHEN OK PUSH SAVE
MAIN MENU
On-Screen
Programming
Set Date and Time
1991 1:00 PM
S U M O T U W E T H F R S A
1
2
1 2
18
9
16
2 3
3 0
J U N E
WHEN OK PUSH SAVE
SET MONTH :
3 4 5 6 7 8
10 11 13 14 15
17 19 20 21 22
2 4 2 5 2 6 2 7 2 8 2 9
25