GoVideo GV2020 - Manual (Page 40)

OUT TO TV
IN FROM: ANTENNA/
CABLE
CH 3
CH 4
DUAL-DECK VCR BACK PANEL
VIDEO
IN OUT
RIGHT
AUDIO OUT
LEFT RIGHT
AUDIO IN
LEFT
STILL TRACKING
DECK 1 DECK 2
TO STEREO AMPLIFIER
RECORD OUTPUT
TO STEREO AMPLIFIER
PLAY OR AUX INPUT
The Audio In and Audio Out connections can be used to connect audio
equipment to your VCR-2.
Simulcast
This feature allows you to record stereo sound from your stereo amplifier
while recording picture from certain TV broadcasts, such as special con-
certs, MTV Music Television, HBO, CINEMAX, etc.
∂
Connect your stereo amplifier tape output connections to the Audio In
connections on your VCR-2 back panel.
≠
Turn on your TV, stereo amplifier, and your VCR-2.
③
Set the Audio Source to Simulcast. See page 24.
④
Select the desired TV channel on the VCR-2. Tune the stereo receiver to
the proper frequency to receive the audio transmission.
∞
To record a Simulcast, insert a blank tape into either deck, turn on
Dolby NR for the appropriate deck if desired (page 24), and press
Record.
Multichannel TV Sound (MTS) Stereo
You can enjoy MTS broadcast stereo by connecting your VCR-2 to your
stereo amplifier and speakers. MTS will allow you to enjoy full stereo sound
when your Audio Source is set to Stereo or TV + SAP.
∂
Connect the Audio Out connections on your VCR-2 back panel to the
play or auxiliary input connections on your stereo amplifier.
≠
Turn on your TV, stereo amplifier, and your VCR-2.
③
Set the Audio Source to Stereo or TV + SAP. See page 24.
④
Select the appropriate input (AUX or TAPE) on your stereo amplifier.
38
Audio Features
& Connections
∂