Garland SH/IN 5000 - Manual (Page 10)

Part # 4520898 (03/31/11) Page 10
INSTALLATION continued
Cut Out for Models
SH/IN 3500 And SH/IN 5000
The size of the cut out in the built-in area must be
13.78” x 13.78” (350 x 350mm), the depth 9.45” (240mm) and
the base at least 16.14” x 13.90” ( 410 x 353mm).
Side view of the right
0.06"
[1.5mm]
Air exit
Ventilator
Air Supply
Air exit
5.63"
[143mm]
12.99"
[330mm]
7.20"
[183mm]
Ceran-surface
12.60"
[320mm]
12.60"
[320mm]
15.12"
[384mm]
15.12"
[384mm]
Front view
Net cable
Plug-in for
operating device
Plug type connection
for operating device
3.86"
[98mm]
13.03"
[331mm]
7.13"
[181mm] 8.90"
[226mm]
Required cut-out of the work top
min. 13.78' x 13.78' [350mmx 350mm]
Mounting height
min. 9.45"
[240mm]
Air supply