Greenheck Fan Combination Fire Smoke Dampers FSD-M211 User Manual

Fire smoke dampers, Model fsd-m211, Combination

Advertising
background image

Model FSD-M211 meets the requirements for fire

dampers, smoke dampers and combination fire

smoke dampers established by:
National Fire Protection Association

NFPA Standards 80, 90A, 92A, 92B, 101, & 105
IBC International Building Codes
ICBO Uniform Building Codes
SBCCI Standard Building Codes
British Standard BS476
Tested to 4 hours at Warrington Fire, UK

Application

Model FSD-M211 is a combination fire smoke damper with 3V style

blades. The FSD-M211 has been qualified to 10.2 m/s and 1 kPa for

operation and dynamic closure in emergency fire smoke situations.

Model FSD-M211 may be installed vertically (with blades running

horizontal) or horizontally and is rated for airflow and leakage in

either direction.

Model FSD-M211 has also been tested in accordance with BS476 to

4 hours at Warrington Fire, UK, and is approved for fire partitions of

4 hours or less where British Standards are required.

Ratings

UL 555 Fire Resistance Rating

Fire Rating:

1

1

2

Hours

Dynamic Closure Rating: Actual ratings are size dependant

Maximum Velocity:

10.2 m/s

Maximum Pressure:

1 kPa

UL 555S Leakage Rating

Leakage Class:

I

Operational Rating: Actual ratings are actuator dependant

Maximum Velocity:

10.2 m/s

Maximum Pressure:

1 kPa

Max. Temperature:

177°C —Depending on actuator

BS476 Fire Resistance Rating

Fire Rating:

4 hours

Standard Construction

Frame:

127mm x 25mm galv. steel hat

channel with reinforced corners . A

low profile head and sill are used on

sizes less than 432mm high to

maximize free area and

performance.

Blades:

1.5mm galvanized steel, reinforced

with 3 longitudinal structurally

designed vee’s.

Seals:

Extruded silicone rubber blade

seals. Flexible stainless steel jamb

seals.

Closure Device:

74°C RRL

Linkage:

Concealed in jamb.

Axles:

13mm diameter plated steel

Bearings:

Bronze sleeve type.

Size Limitations

Minimum Size:

101mm W x 101mm H

Maximum Size:

Single Section:

813mm W x 1270mm H

or 914mm W x 914mm H

Multiple Section:

3251mm W x 2540mm H Vertical

or 3658mm W x 2438mm H

Horizontal

Optional Features

• Stainless steel bearings

• 100°C, and 177°C RRL available (UL only)

• 69°C fusible link (BS476)

• Electric or pneumatic actuators to accomplish smoke

management and system functions.

• Sleeve with Integral flange on both sides available

• RRL/OCI (open close indication)

• TOR (remote override of 74°C or 100°C closure allows damper to

perform smoke management functions during a fire emergency)

Model FSD-M211

Steel 3V Blades

UL 555S Leakage Class I

UL555 1

1

2

Hour Fire Resistance Rating

4 Hour Fire Resistance Rating (BS476)

Combination

FIRE SMOKE DAMPERS

* W & H dimensions furnished approximately 6mm undersize.
(Add sleeve thickness for overall sleeved damper dimension)
Right hand drive is shown. Left hand drive is available upon request.

H

W

LH

RH

“UL CLASSIFIED (see complete marking on

product)”

“UL CLASSIFIED to Canadian safety standards

(see complete marking on product)”

Standard 555 & 555S (Listing #R13317)

Greenheck Kunshan Co. Ltd. and Greenheck Fan

Corporation certifies that the model FSD-M211

shown herein is licensed to bear the AMCA Seal. The

ratings shown are based on tests and procedures

performed in accordance with AMCA Publication

511 and comply with the requirements of the AMCA

Certified Ratings Programs. The AMCA Certified

Ratings Seal applies to air performance ratings only.

®

AIR

MOVEMENT

AND CONTROL

ASSOCIATION

INTERNATIONAL, INC.

AIR

PERFORMANCE

Installation instructions available at www.greenheck.com

Advertising