GE VG4250 - Manual (Page 10)

8 Chapter 1
Connections & Setup
TV + VCR
Note: Your television back panel may not look exactly like the model shown here.
1. Connect the VCR to the TV
Connect one end of the supplied RF coaxial cable to the RF OUT jack on
the back of the VCR and the other end to the TV’s Antenna IN jack.
2. Connect the antenna/cable feed to the VCR
Connect the satellite, cable, or antenna RF coaxial cable to the ANT. IN
jack on your VCR.
Note: Flip the CH 3/4 switch on the back of the VCR to the channel that is not
used in your area. This will be the channel that the TV must be tuned to in order
to see the VCR’s picture.
Go To Page 11
Need Some Help?
If you prefer, we can
provide you with the
name of an Authorized
Service Representative
who will visit your home
for a fee to install your
electronic entertainment
system and to instruct
you in its operation. For
details about this service,
call 1-888-206-3359.
VC
R
TV
VCR
TV (back panel)
CABLE/
ANTENNA
VIDEO
R L / MONO
S-VIDEO
AUDIO
L
IN
OUT
From Cable
or Antenna
ANT. IN
RF OUT
CH.
VIDEO
AUDIO
OUT IN
R
L
3 4
2
1