GE VG4250 - Manual (Page 11)

Chapter 1 9
Connections & Setup
TV + VCR + Satellite Receiver
Note: Your television and satellite receiver back panel may not look exactly like the
models shown here.
1. Connect the VCR to the TV
Connect one end of the supplied RF coaxial cable to the RF OUT jack on
the back of the VCR and the other end to the TV’s Antenna IN jack.
2. Connect satellite receiver to the VCR
Connect an RF coaxial cable to the antenna output jack on the satellite
receiver and to the ANT. IN jack on the VCR.
3. Connect the antenna to your satellite receiver
If necessary, connect an antenna or cable box RF coaxial cable to the
antenna input jack on the satellite receiver.
4. Connect the satellite feed to the satellite receiver
Connect the satellite receiver’s RF coaxial cable feed to the satellite input
jack on the satellite receiver.
Go To Page 11
CABLE/
ANTENNA
VCR
TV
VIDEO
R L / MONO
S-VIDEO
AUDIO
L
IN
OUT