Great Dane GSRKA1934S - Manual (Page 26)

SERVICE TRANSMISSION
SERVICE TRANSMISSION- 24
IMPORTANT: Avoid Damage! Do not add oil beyond
FULL mark. Oil capacity after draining may be less than
dry fill capacity. Check oil level before filling complete-
ly.
NOTE: Dry fill capacity for hydraulic system is 3.1L (3.3
qt.).
Fill oil reservoir with approximately 1.9L (2 qt.) of oil.
Insert dipstick. Tighten cap.
Start engine.
Move throttle lever to 1/2 to 2/3 position.
Unlock park brake.
CAUTION: Avoid injury! Help prevent serious
bodily injury. Remain alert to other people and
the surroundings when operating the machine.
Cycle motion control levers forward and rearward sev-
eral times. Check for leaks around filter.
Stop engine. Check oil level. Add oil as necessary to
bring oil level to FULL mark on dipstick.
Cleaning Hydraulic Oil Pump Cooling Fins
CAUTION: Avoid injury! Compressed air can
cause debris to fly a long distance.
Clear work area of bystanders.
Wear eye protection when using compressed air for
cleaning purposes.
Reduce compressed air pressure to 210 kPa (30 psi).
IMPORTANT: Avoid Damage! To ensure proper cooling,
keep the cooling fins clean at all times. Operating the
machine with obstructed cooling fins could cause dam-
age due to overheating.
Park machine safely. (See Parking Safely in the
SAFETY section.)
A
8.
9.
10.
11.
12.
13.
14.
•
•
•
1.
Clean hydraulic oil cooling fins on each hydraulic pump
with a rag, brush or compressed air.
Clean area around hydraulic pumps and frame.
Checking and Replacing Pump Traction Drive Belt
CAUTION: Avoid injury! Fingers or loose
clothing can get caught in rotating parts. Stop
engine and wait for all moving parts to stop
before servicing.
NOTE: The traction drive belt will not require a ten-
sion adjustment. Belt is self-adjusted using a spring
tensioner.
Checking Traction Drive Belt:
1. Park machine safely. (See Parking Safely in the SAFETY
section.)
A
B
2. Remove two cap screws (A).
3. Remove rear shield (B).
Removing Traction Drive Belt:
Park machine safely. (See Parking Safely in the
SAFETY section.)
Remove mower deck drive belt. (See Replacing Mower
Deck Drive Belt in the SERVICE MOWER section.)
2.
3.
1.
2.