Great Dane GSRKA1934S - Manual (Page 38)

SERVICE MISCELLANEOUS
SERVICE MISCELLANEOUS - 36
Tighten wheel nuts in numbered sequence shown for
safe wheel installation. Tighten alternately until recom-
mended torque value is reached.
Checking Tire Pressure
2.
CAUTION: Avoid injury! Explosive separation
of tire and rim parts is possible when they are
serviced incorrectly:
Do not attempt to mount a tire without
the proper equipment and experience to
perform the job.
Do not inflate the tires above the recom-
mended pressure.
Do not weld or heat a wheel and tire as-
sembly. Heat can cause an increase in
air pressure resulting in an explosion.
Welding can structurally weaken or de-
form the wheel.
Do not stand in front or over the tire
assembly when inflating. Use a clip-on
chuck and extension hose long enough
to allow you to stand to one side.
•
•
•
•
Check tires for damage.
Check tire pressure with an accurate gauge.
Add air, if necessary:
Tire Size Pressure
Front: 11 x 4 - 5 138–173 kPa (20-25 psi)
Rear: 18 x 6.5 - 8 69–97 kPa (10–14 psi)
Servicing Caster Wheel Roller Bearings
Park machine safely. (See Parking Safely in the
SAFETY section.)
Raise and securely support front of machine.
1.
2.
3.
1.
2.