Gateway E-9520T - Manual (Page 100)

APPENDIX B: BIOS Settings
94
The following second level submenus are accessed from the submenu indicated in the first column.
IPMI Configuration
Status of BMC
BMC Firmware Revision
View BMC Event Log Provides data on
event log
Clear BMC System Event Log
BMC PEF Status Disabled
Enabled
Toggle PEF No
Yes
IOAT Disabled
Enabled
Restore on AC Power
Loss Power Off
Power On
Last State
Wake on RING
function Disabled
Enabled
Plug & Play BMC
detection Disabled
Enabled
Exit
Save Changes and Exit (F10)
Discard Changes and Exit
Discard Changes
Load Optimal Defaults
Load Custom Defaults
Save Custom Defaults
BIOS submenu BIOS 2nd level
submenu
Setting Value
IDE
Configuration
Primary IDE Master
(All IDE drives) (Below is shown information
and options appropriate to
drive type)
Device Device information
Vendor Device vendor
Size Device size
LBA Mode Device LBA mode
Block Mode Device block mode
BIOS menu BIOS submenu Setting Value