GN Netcom 9000MWD - Manual (Page 12)

1. Handset ..........……………………..….....…...…... Hearing aid compatible, low profile styling.
2. Charge LED …….……………………………….. Indicator that lights when the handset is charging.
3. In-Use / Ringer Indicator ………………………... Indicator shows line ringing, line in use
4. Mute Key ………………………………………… Used to mute base micphone. LED indicator shows
when Mute is in use.
5. Speaker Key ……………………………………… Used to activate speaker mode. LED indicator shows
when Speaker is in use.
6. Speakerphone Volume Control Rocker Switch ….. Used to control the loudness of the speakerphone.
7. Locate Key ………………………...……………... Used to locate the handset unit.
8. Pause/Redial Key ....………..........………….….… Submerged key used to program pause into speed dial
memory or used to dial the last number dialed
9. TouchLite TM One Touch Message Retrieval Key… Combination visual message waiting lamp & speed dial
key used for message retrieval. LED indicator will blink
indicating a new message in the user’s voice mail box
(user must subscribe to a messaging system).
10. Flash Key ........…….…...............…………………. Submerged key used to program a flash timing into
speed dial memory.
11. Store Key ...……….………….......….................…. Submerged key used to program speed dial keys.
12. Guest Service Keys (Speed Dial) ……………….… 10 programmable speed dial keys used for one-touch
access to hotel guest services.
13. Neon 90V / LED Switch …………………………. Used to select 90 Volt Neon or low voltage LED
operation for Message Waiting.
14. Antenna …………………………………………... Used to communicate with the handset.
11
BASE UNIT