GN Netcom 9000MWD - Manual (Page 19)

19
Power Adapter “LINE” Connection
The power adapter “LINE” connection is
used to connect the telephone lines from
the wall jack to the telephone.
Using the 15’ modular telephone line cord
provided, connect one end of the cord to
the RJ14 telephone jack on the wall or
base board. The remaining end of the
cord plugs into the “L1+L2” jack side of
the power adapter.
Power Adapter “PHONE” Connection
The power adapter “PHONE” connection is
used to provide both the telephone line and
the power source to the telephone.
Using the 15’ modular telephone line cord
provided, plug one end of the line cord into
the back of the telephone. Plug the remain-
ing end into the power adapter jack labeled
“PHONE”.
IMPORTANT!
The telephone will not function if the line cord connections are not properly inserted into the cor-
rect jack. Be sure that the telephone line cord connections are not reversed. (“LINE”/”PHONE”).
P
H
O
N
E
O
U
T
120V AC Power
L
I
N
E P
H
O
N
E
L
1
+
L
2
O
U
T
L
2