GN Netcom 9000MWD - Manual (Page 21)

20
Message Waiting Lamp
The 9000MWD supports a low-voltage LED
message waiting lamp or 90VDC neon.
To turn ON, slide the switch to the “LED” or
“NEON” position. The switch is located
underneath the overlay and faceplate on the top
of the base.
Note: The 9000MWD is factory preset to
the “Neon” setting.
*NOTE: Voice Mail will ONLY operate if
you subscribe to your local telephone
company voice mail service and/or if your
PBX telephone system is equipped with
this technology. These telephone features
will not work unless you are a subscriber.
!