GN Netcom 9000MWD - Manual (Page 22)

Guest Service Keys
(Speed Dial Memory)
The 9000MWD has 10 one-touch speed dial
memory locations that are used as a conven-
ience for dialing frequently used numbers.
Each speed dial memory location can store up
to 32 digits.
Note:
To program Speed Dial into the tele-
phones memory, the line cord must
be plugged into the power adapter
and the telephone line cord must be
plugged into the wall jack. The
Speaker key must be activated.
Step: Procedure:
1. Press the Speakerphone ON/OFF key to activate
the phone.
2. Locate the Store key under the plastic overlay on
the top housing. Press the “Store” key.
3. Dial the digits using the numeric dial pad
(example: 1 2 3 4 5 6).
4. Press the desired speed dial location (1 through 5
or 10, plus the message waiting lamp) where the
memory is to be saved.
____________________________________________
To program additional numbers, repeat steps 3 thru 4.
____________________________________________
22