GE JGB910 - Manual (Page 37)

Customer Service
Operating Instructions
Safety Instructions
Installation Instructions
Troubleshooting T
ips
37
Warming Drawer Rack
Clean the rack with detergent and water.
After cleaning, rinse the rack with clean
water and dry with a clean cloth.
Warming Drawer Pan
The warming drawer has a removable pan
for easy cleaning.
Remove the pan, using the side edge
handles and clean it with detergent and
water. After cleaning, rinse with clean water
and dry with a clean cloth. Replace the pan
in the warming drawer.
Removable Warming Drawer (on some models)
Most cleaning can be done with the drawer
in place. However, the drawer may be
removed if further cleaning is needed. Use
soap and warm water to thoroughly clean.
To remove the warming drawer:
Pull the drawer straight out until it
stops.
Press the left rail release down and
push the right rail release up, while
pulling the drawer forward and free.
To replace the warming drawer:
Place the left drawer rail around
the inner left rail guide and slide it in
slightly to hook it.
Place the right drawer rail around the
inner right rail guide and slide it in
slightly to hook it.
Slide the drawer all the way in.
Before performing any adjustments,
cleaning or service, disconnect the range
electrical power supply at the household
distribution panel by removing the fuse or
switching off the circuit breaker. Make
sure the warming drawer heating element
is cool.