Garland Convection Microwave Oven - Manual (Page 14)

Part # 1955203 (12/06) Page 14
NOTE: the controller will only accept cooking
temperatures for the number of profiles for which a
cooking time has been set. If the product key is pressed
after the last programmed profile, the first temperature
will be displayed.
• Press SET after the last cooking temperatures
has been entered, HOLD will be displayed.
7. Use the START/CANCEl key to select yes or no.
Press the SET key.
8. If yes was selected, the HOLD LED will light.
Enter the hold temperature using the dial. (factory
preset at 200°F) Press the SET key, FAN will be
displayed and the FAN LED will light.
• Set the fan speed desired for the first cooking
profile using the individual fan keys (HIGH, LOW
or PULSE), press the product key and set the fan
speed for the second cooking profile. Continue
until all the profiles have been assigned a fan speed.
Press the SET key when complete. As with the
temperature, if the product key is pressed after the
last programmed profile, the first fan speed will be
displayed.
9. FL or ST will be displayed (for flex time or straight
time) (factory preset for flex time). Select flex or
straight time using the START/CANCEL key for
the first profile. Press the product key and select
straight time or flex time for the second profile.
Continue until all the profiles have been assigned
straight or flex time. Press the SET key when
complete. If the product key is pressed after the
last programmed profile, the first profile will be
displayed.
10 Programming for that product key is complete.
Cooking Using The Product Keys
(Master 475)
1. On initial start-up, press the product key for
the menu item to be cooked. Wait until Load is
displayed.
2. Load the oven.
OPERATING INSTRUCTIONS Continued
3. Press the product key for the loaded menu item.
4. Press the START/CANCEL, key.
5. To cancel the alarm or the holding operation, press
the START/CANCEL key followed by the product
key.
Verifying Hold Time (Master 475)
While a product is being held, press and hold the product
key. The actual hold time will be displayed.
Selecting Fahrenheit or Celsius (Master 475)
Press PROG and ACTUAL TEMP keys at the same
time, F or C will be displayed. (factory preset for F)
Press the START/CANCEL key to switch between F
and C.
When the desired setting is displayed press the PROG
and ACTUAL TEMP keys at the same time.
Cooking With The Shelf Timer (Master 475)
The shelf timer option is used to independently time
each of the up to six different shelves or racks within
the oven.
NOTE: To use the shelf timer option, at least one
product key must be programmed with a cooking profile
(temperature, time, fan speed, flex or straight time). The
program key must be limited to a single cooking profile
to be used with the shelf timing option. If more than
one product key is to be used, all product keys to be
used must feature the same cooking temperature and
fan speed. Flex or straight time and cooking time can
be different. The Cook-N-Hold option can not be used
with the shelf timer.
Pressing the desired product key will bring the oven
to the desired cooking temperature, once the oven has
reached the proper cooking temperature as indicated by
Load in the display.
1. Press the product key containing the desired
cooking profile (1-9).