Garland MPOE5L - Manual (Page 7)

Part # 4518084 Rev. 1 (09/04) Page 7
Product Buttons (1 – 17)
The product buttons are used to select pre-programmed
recipes for each product. (Programming is available for
all product buttons.)
Number Buttons 1 – 0:
The first ten Product Buttons,
outlined on the previous page, are
used to enter programming values,
i.e. code, set temperature, etc. They
correspond to the numbers 1 – 0 as
show to the right.
Cancel Button
The Cancel Button has several functions:
1. Press the Cancel Button to cancel the current menu
selection (if multiple cook cycles are in progress, the
last cycle started will be the first one canceled.)
2. In idle mode, press the Cancel Button to turn the
oven light on/off.
3. Press the Cancel Button to stop the alarm from
beeping and the display from flashing when a cook
cycle ends.
4. Press the Cancel Button to exit Recipe Programming,
System Programming, and Diagnostics Mode.
Preheat Buttons
Preheat Bakery 325, Preheat Bakery 350, and Preheat
Bread 425 are used to preheat the oven to the different
temperatures required for the various items:
· Preheat Bakery 325: 325°F, high fan speed
· Preheat Bakery 350: 350°F, high fan speed
· Preheat Bread 425: 425°F, high fan speed
*NOTE: Preheat Bread has additional functions:
1. In Programming, Preheat Bread 425
scrolls through available values (i.e. high/
low fan speed) and is used as the NO
button.
2. In Diagnostics Mode, the Preheat Bread
425 button is used to scroll through the
list of tests.
LED’s
• When the desired Preheat Button is
pressed the corresponding LED will illuminate.
The LED’s of the menu items that match the chosen
preheat temperature will also light.
• While cooking, the LED of the selected item will
blink to show the user which item is being cooked.
If multiple cook cycles are started, the LED of the
product that will finish first will flash faster than
the LED’s of the other products. The LED’s of
other items with the same recipes other than time,
i.e. same temperature, fan speed, and moisture,
will also light to show the user which items can be
additionally cooked in the oven.
• When a product cooking times out, the
corresponding LED will flash rapidly to alert the
user of which item to remove. Opening and closing
the door will begin the counter of the next product
to be removed.
OPERATING INSTRUCTIONS continued...