Garland MPOE5L - Manual (Page 8)

Part # 4518084 Rev. 1 (09/04) Page 8
OPERATING INSTRUCTIONS continued...
Control Operation
Startup and Normal Operation
• Pressing the On/Off button will power up the
control and the oven will begin heating to Preheat
The user can select Preheat Bakery 350 or Preheat
Bread 425 to heat the oven to the respective settings.
The display will show “Preheat Bakery 1”, “Preheat
Bakery 2”, or “Preheat Bread”.
• NOTE: No other buttons are active at this point.
• When the oven temperature is within the ready
band (+/-50°F), the oven will display “Heat Soak”
and begin a ten-minute countdown timer to stabilize
the oven (Provided the oven temperature was at or
below 100°F at startup).
• After the ten minute heat soak, the oven will display
“Select Bakery 1” (Preheat Bakery 325), “Select
Bakery 2” (Preheat Bakery 350), or “Select Bread”
(Preheat Bread 425).
• LED’s will light for items that can be selected for
cooking.
• Pressing a product button (provided the LED is
illuminated) once will begin the countdown cycle
for the programmed time.
• NOTE : Any item that can also be cooked will have
its LED illuminated
During the Cooking Cycle:
1. The display will show the product and the count
down time remaining.
2. The LED of the selected item will flash and the
oven light will turn on.
3. Up to three, (3), more product buttons can be
selected for cooking as long as their LED’s are lit.
The count down time of the product that will be
done first will be displayed and the corresponding
LED will flash rapidly. The LED’s of the other
products cooking will flash slowly.
4. The external display will show the count down time
of the item to be done first, then will switch to the
next item to be done and so on.
• NOTE : To cancel a cook cycle, Press the Cancel
button. If more than one cook cycle is active, pressing
Cancel will end the last cycle started.
5. When the cooking time expires, the name of the
product that finished along with “DONE” will show
on the display. Also, the corresponding LED will
flash and the alarm will sound. Open and close the
door, or press Cancel to clear the prompt. (If more
than one cook cycle is active, the finished product’s
LED will flash faster than the other LED’s.)
Shutdown (Auto Cool Down)
• With the oven on, pressing the On/Off button will
initiate a shutdown of the oven.
• If the oven temperature is less than 150°F, “OFF”
will be displayed for 30 seconds and then the control
will go blank.
• If the oven temperature is more than 150°F, auto
cool down mode will begin. Open the door slightly,
only the fan will run at high speed to cool the oven.
“Auto Cool Down” will show on the display.
• If the door is open too much, “Close Door Slightly”
will be displayed. Close the door until “Auto Cool
Down” is displayed.
• If the door is not open enough, “Open Door
Slightly” will be displayed. Open the door until
“Auto Cool Down” is displayed.
• Once the oven temperature falls below 150°F, the
fan will stop and the oven will display “OFF” for
30 seconds and then turn blank.