Garland MPOE5L - Manual (Page 9)

Part # 4518084 Rev. 1 (09/04) Page 9
OPERATING INSTRUCTIONS continued...
Control Programming
Recipe Programming
• NOTE : In programming product buttons (1-17),
each button can have different steps called Profiles. Each
profile can change the fan speed, cook temperature, cook
time, alarm, time mode, and moisture for a product.
If more than one profile is programmed for a product,
the product cannot be combined with other products.
• In order to start additional cook cycles; the recipes of the
products must be exactly the same except for cook time.
1. To program recipes for the product buttons (1-17),
press and hold the Program button for three, (3)
seconds. When prompted, enter the code: 4-2-7-
5 using buttons 1 – 0. Press the “ENTER” (lower
right blank) button.
2. The display will prompt for a programmable button,
1-17. Press the desired button. The LED for the
selected button will light. Press “ENTER” (lower
right blank).
3. The display will show the message “Profile 1” in the
lower left corner and prompt for the Fan Speed on
the top line. Use the “YES” (upper right blank) and
“NO” (Preheat Bread 425) buttons to toggle fan
high and low. After selecting a fan speed, press the
“ENTER” (lower right blank).
4. The display will then prompt for the Cook
Temperature. Enter the temperature using buttons
1 – 0 and press the “ENTER” (lower right blank)
button.
5. Next, the display will prompt for the Cook Time.
Enter the cooking time using buttons 1 – 0 and
press the “ENTER” (lower right blank) button.
6. Next, the display will ask for Alarm Time (to rotate
items). Enter the time using buttons 1 – 0 and press
“ENTER” (lower right blank). (Enter the time at
which the rotation needs to be done NOT how
long into the cook it needs to be done, i.e. 2:00
cook time, alarm time 1:30. Alarm will sound when
timer reaches 1:30 on the display (not 0:30).)
7. The display will ask for the Time Mode. Use “YES”
(upper right blank) and “NO” (Preheat Bread 425)
to toggle time mode between flex and straight time.
Press the “ENTER” (lower right blank) button.
8. The display will ask if Moisture is desired. Press the
“YES” (upper right blank) and “NO” (Preheat Bread
425) buttons to set moisture from NONE-LEVEL
9. Press the “ENTER” (lower right blank).
Moisture Level Duration
NONE 0 PULSES
LEVEL 1 1 PULSE EVERY 5 SECONDS
LEVEL 2 1 PULSE EVERY 10 SECONDS
LEVEL 3 1 PULSE EVERY 15 SECONDS
LEVEL 4 1 PULSE EVERY 20 SECONDS
LEVEL 5 1 PULSE EVERY 25 SECONDS
LEVEL 6 1 PULSE EVERY 30 SECONDS
LEVEL 7 1 PULSE EVERY 35 SECONDS
LEVEL 8 1 PULSE EVERY 40 SECONDS
LEVEL 9 1 PULSE EVERY 45 SECONDS