Stovax 7008Bl - Manual (Page 21)

21
INsTAllATIoN INsTRUCTIoNs
3.3 Take care when handling, as bricks can become fragile after
use. Life span depends on the type of fuels burnt and the
level of use.
• Replace damaged bricks as soon as possible
3.4 To remove bricks:
• Lift Baffle and pull as far forward as possible
• Pull base of side brick towards centre of stove
• Remove brick
• Repeat with other side
• Replace in reverse order
4. FITTING & ReMoVAl oF BAFFle
(BRUNel 1A oNlY)
4.1 The appliance is fitted with a baffle in the top of the firebox
to maintain efficient combustion.
4.2 Allow the appliance to cool fully before removing baffle
system.
4.3 Remove the Log Guard from the appliance to give access to
the firebox.
4.4 To remove baffle:
• Lift Baffle and pull as far forward as possible
• Remove side brick, see above
• Remove baffle
• Replace in reverse order
4.5 Remove and clean the Baffle System to clear the flue ways
of soot and debris . This ensures the safe, efficient operation
of the appliance. The frequency of cleaning will depend on
the stove operating conditions.
4.6 Replace any damaged baffles immediately.
4.7 Do not modify the baffle system.
5. FITTING ANd ReMoVAl oF
THe RIddlING MeCHANIsM (Multi-fuel only)
5.1 The Riddling Mechanism can be removed for cleaning to
maintain good working condition.
To remove Riddling Mechanism:
• Remove the Log Guard from the appliance to give access
to the firebox
Stationary
Grate
Moving
Centre Grate
AR2146
• Lift the moving grate parts, see picture 6
Moving Grate
Stationary Grate
Riddling Arm
AR2148
• Clean parts
• Replace parts ensuring that the riddling arm is relocated
in the moving grate, see picture 6 and 7
Riddling Arm
Moving
Centre Grate
PR7207a