Stovax 7008Bl - Manual (Page 9)

9
7. AsH ReMoVAl
7.1 All fuels:
• Open Doors, See Diagram 11
AR2142
• Riddle, See Diagram 12
Riddling Mechanism
• Remove Ashpan carefully. Heat can remain long after use,
See Diagram 13
Ashpan Tool
AR2140
• Use gloves, or place the ash into a Stovax Ash Caddy
(Stovax Part No. 4227)
• Remove ash at least once every week when burning wood
• Do not place hot ash in a bin made from plastic or any
other combustible material.
UseR INsTRUCTIoNs
8. oVeR NIGHT BURNING
8.1 It is possible to get the appliance to burn over night.
In order to do this:
• De-ash prior to final refuelling
• Set air controls to low combustion settings
This will blacken the glass over night but it will clear when
operated at high output for a short period.
• Use smokeless fuel or small, thick logs depending on fuel
desired
9. oVeR-FIRING
9.1 Do not over-fill with fuel or use at maximum output for
long periods or over-firing can occur. If the flue pipe, flue
collar or top plate glow red the appliance is over-firing:
• Close the air controls to reduce the output
9.2 Over-firing can cause permanent damage to the appliance.
10. CHIMNeY FIRe
10.1 If a chimney fire occurs:
• Shut all air controls immediately
• Evacuate the building
• Call the fire brigade
• Do not re-enter the building until it is confirmed safe
10.2 do not use the appliance after a chimney fire until:
a) It has been inspected by a registered installer,
confirming the appliance is safe to use*
b) The chimney system inspected and swept by a chimney
sweep, confirming the system is structurally sound and free
from obstruction before re-use.**
c) It is repaired as required before re-use. Use only
genuine Stovax replacement parts to keep your appliance in
safe and efficient working order.
In the U.K:
* registered with HETAS (GB only)/INFO (Republic of
Ireland only)
**This should be done by a NACS registered (UK only)/
INFO registered (Eire only) chimney sweep, who will issue
you with a certificate.