Epson EMP-X3 - Manual (Page 52)

47 Problems Solving
When the Indicators Provide No Help
If any of the following problems occur and the indicators do not offer a solution, refer to the pages given for each problem.
No images appear s p.48
Projection does not start, the projection area is completely black, the
projection area is completely blue, and so on.
Projection stops automatically s p.48
The message "Not Supported." is displayed s p.49
The message "No Signal." is displayed s p.49
Images are fuzzy or out of focus s p.50
Interference or distortion appear in images s p.50
Problems such as interference, distortion or black & white checked
patterns appear.
Image is truncated (large) or small s p.51
Only part of the image is displayed.
Image colours are not right s p.52
The whole image appears purplish or greenish, images are black &
white, colours appear dull, and so on.
(Computer monitors and LCD screens have different colour
reproduction performance, so that the colours projected by the
projector and the colours appearing on the monitor may not
necessarily match, but this is not a sign of a problem.)
Images appear dark s p.52
Nothing appears on the external monitor s p.53
Problems relating to images
Power does not turn on s p.53
No sound can be heard or the
sound is faint s
p.53
The remote control does not work
s
p.54
Problems when projection starts
Other problems