Saving a user's logo – Epson EMP-X3 User Manual
Page 69
64
Saving a User's Logo
You can record the image that is currently being projected as a user's logo.
PROCEDURE
A
Project the image you would like to use as the user’s
logo, and then display the configuration menu.
B
Select "Extended" from the configuration menu, and
then select "User’s Logo".
For details on this operation, refer to
"
. s
Check which buttons on the remote control or the control panel
you can use, and the operations they perform, in the guide at the
bottom of the screen.
When a user's logo is recorded, the previous user's logo
will be erased.
Using the remote control
Using the control panel
• If the "User’s Logo Protect" function of "Password
Protect" is set to "On", a message is displayed and the
user's logo can not be recorded. To record a user's logo,
set "User’s Logo Protect" to "Off" first. s
• If keystone correction, E-Zoom and so on, have been
carried out, the function currently being performed is
cancelled when the "User’s Logo" menu is selected.