Composite monitor output, Y/c monitor output, Alarm i/o port – GE TRIPLEX 0150-0193C User Manual
Page 10: Alarm input, Triplex, When connecting directly from the dvmr, Alarm pcb active alarm inputs vary by dvmr
0150-0193C
10
Calibur DVMR
e
Triplex
Composite Monitor Output
When connecting directly from the DVMR
e
Triplex to
the monitor, select the 75-Ohm impedance setting on
the monitor.
Cable: 75-Ohm Coaxial
Connectors: BNC
If an additional device is connected to the monitor’s looping output, set the termination of the additional
device as 75-Ohm, and set the termination of the monitor as Hi-Z (High Impedance).
Y/C Monitor Output
Y/C video output has a 4-pin mini-DIN style
connector. This style of connection is also referred to
as SVHS and S-Video.
Cable: 75-Ohm Coaxial
Connectors: BNC
Alarm I/O Port
The back panel of the unit is equipped with an Alarm
Port (DB-25 style connector).
Do not attempt to wire directly to the DB-25
connector on the back panel.
DB-25 Connector on Back Panel
Connect the Alarm PCB (supplied with the unit) to the Alarm Port. Wire all alarm inputs to the Alarm
PCB per the pin out specifications shown below.
Pin 1: Alarm Input 1.
Pin 2: Alarm Input 2.
Pin 3: Alarm Input 3.
Pin 4: Alarm Input 4.
Pin 5: Alarm Input 5.
Pin 6: Alarm Input 6.
Pin 7: Alarm Input 7.
Pin 8: Alarm Input 8.
Pin 9: Alarm Input 9.
Pin 10: Alarm Input 10.
Pin 11: Alarm Input 11.
Pin 12: Alarm Input 12.
Pin 13: Alarm Input 13.
Pin 14: Alarm Input 14.
Pin 15: Alarm Input 15.
Pin 16: Alarm Input 16.
Pin 17: Alarm Output Relay #1.
Pin 18: Ground.
Pin 19: Ground.
Pin 20: Ground.
Pin 21: Alarm Output Relay #1 Common.
Pin 22: Alarm Output Relay #2.
Pin 23: External Alarm Silence and Acknowledge Input.
Pin 25: Alarm Output Relay #2 Common.
N
O
1
A
1
A
2
A
1
4
A
1
5
A
1
6
A
3
A
4
A
5
G
N
D
A
7
G
N
D
A
6
N
O
2
C
O
M
1
G
N
D
A
8
A
9
A
1
0
G
N
D
A
C
K
A
1
1
V
e
x
t
A
1
2
A
1
3
C
O
M
2
1
7
1
2
1
4
1
5
1
6
3
4
5
1
8
7
1
9
6
S
ig
n
a
l
P
IN
2
2
2
1
2
0
8
9
1
0
2
0
2
3
1
1
2
4
1
2
1
3
2
5
S
ig
n
a
l
P
IN
Alarm PCB
Active alarm inputs vary by DVMR
e
model. 4 channel units (4CT) have 4 active alarm inputs. 10
channel units (10CT) have 10 active alarm inputs.
Alarm Input
An alarm condition can be activated by devices such as pressure pads, passive infrared detectors,
door switches, or other similar devices.