GE TRIPLEX 0150-0193C User Manual

Page 40

Advertising
background image

0150-0193C

40

Calibur DVMR

e

Triplex

q Main Menu

→ Alarms → Relay Configuration

Use this menu to configure each relay output as either:

Normally Open

Normally Closed

q Main Menu

→ Alarms → Buzzer Setup

Use this menu to configure the internal buzzer.

Global Buzzer: The Global Buzzer setting acts as a master On/Off
switch. Setting the Global Buzzer to OFF deactivates all buzzer
activity.

Live Alarm Buzzer: Activates while receiving alarm input.

Videoloss Buzzer: Activates when video loss is detected.

Disabling the Videoloss buzzer disables all videoloss buzzer activity.
Videoloss buzzers may be disabled on a per camera basis in the
Alarms

→ Videoloss Action menu.

Playback Buzzer: Activates during playback of recorded alarms.

q Main Menu

→ Alarms → Videoloss Action

Use this menu to configure how the unit responds to videoloss.

Camera: Select the camera you wish to configure.

Relay 1: If enabled, the unit will activate Relay 1 when videoloss
is detected.

Relay 2: If enabled, the unit will activate Relay 2 when videoloss is
detected.

Buzzer: Use this setting to disable the videoloss buzzer activation
on a per camera basis. To disable videoloss buzzer activation on
all cameras go to the Main Menu

→ Alarms → Buzzer Setup menu,

described in the previous section.

q Main Menu

→ Alarms → Pre Alarm Duration

During recording, the unit stores up to 5 seconds of recorded
information in a buffer. This data can be automatically retrieved when
an alarm is activated. Select the amount of time just previous to the
activation of an alarm you wish to retrieve.

q Main Menu

→ Alarms → Notification

Use this menu to select:

Email Alarm Notification.

TCP/IP Dialout Notification.

Relay Configuration

[CANCEL] [OK]

Relay 01:

Relay 02: N/CLOSED

N/OPEN

Buzzer Setup

[CANCEL] [OK]

Global Buzzer :

Live Alarm Buzzer: ON

Videoloss Buzzer : ON

Playback Buzzer : ON

ON

Videoloss Action

[CANCEL] [OK]

Camera :

Relay 1: Disable

Relay 2: Enable

Buzzer : Enable

01

Pre Alarm Duration

05

(Time in Seconds)

TCP/IP Dialout

Email

Advertising