Automatic dialing – GE B640 User Manual

Page 63

Advertising
background image

54

❚ The FAXPHONE beeps once to indicate that the document has been sent

successfully.

TRANSMITTING OK

❚ If an error occurs during sending, the FAXPHONE beeps intermittently for a few

seconds. If this happens, try sending the fax again.

❚ The FAXPHONE automatically redials if the receiving fax does not answer or if the

line is busy. (You can specify the number of times it redials; see AUTO REDIAL in
TX SETTINGS, p. 76.)

❚ To stop sending before the fax is finished, press [STOP]. Then you may need to lift

the operation panel to remove the document, see Clearing document jams, p. 58.

❚ If an error message appears on the LCD, correct the error and then press [STOP].

Refer to Error codes, messages and solutions, p. 98.

Automatic Dialing ______________________________

■ Sending a document using One-touch Speed Dialing or

Coded Speed Dialing

After registering the One-touch numbers or Coded Speed Dialing numbers you can
send documents as follows:

1

Feed the document face-down into the
Automatic Document Feeder (ADF).

See Loading the document, p. 45.
You can set the resolution and the density, p. 47.

2

Press the One-touch Speed dialing button
assigned to the number to which you wish to
fax.

or

Press [CODED DIAL] and enter the appropriate
two-digit Coded Speed Dialing code.

Wait a second for the number to appear after the
name of the number.
❚ If no number is registered for the button or code

you pressed, the LCD display shows the NO TEL#
message. Make sure you pressed the correct button
or entered the correct code and that the number you
want to dial is registered correctly.

❚ If you make a mistake, press [STOP]. Then press

the correct One-Touch Speed Dialing button or
press [CODED DIAL] and re-enter the code.

❚ If an error message appears on the LCD, correct

the error and press [STOP]. If necessary, refer to
Frequently Asked Questions, p. 92.

FINE

CANON FAX

12345678999

CANON CANADA

2345678999

Advertising