GM 2006 Corvette - Manual (Page 15)

15
ter is used or the memory button is
pressed. (Settings: Off/On)
Personal Options Menu
To change the preferences of your
Personalization Features:
• Make sure the vehicle is running
and in Park (P) (with an automatic
transmission) or in Neutral (with a
manual transmission) with the parking
brake set.
• Press the OPTION button (the DIC
will display the current driver, 1 or 2,
for a few seconds and then display
the first Personal Options Menu item).
• Use the RESET button to change the
setting of the displayed feature.
• Press the OPTION button to scroll
through the list of features.
• If a button is not pressed within
45 seconds, the DIC will exit the
Personal Options Menu.
Retained Accessory Power (RAP)
As an added convenience, Retained
Accessory Power (RAP) powers the
vehicle’s accessories (radio, power win-
dows, etc.) for a limited period of time
after the ignition is turned off.
See Section 2 of your Owner Manual.
Passenger Air Bag Status
Indicator
Your vehicle is equipped with a
Passenger Sensing System located in
the front passenger seat for the front
passenger frontal air bag, and a passen-
ger air bag status indicator located on
the rearview mirror.
See Sections 1 and 3 of your Owner Manual.
For your convenience, the headlamp
control can be left in the AUTO mode for
automatic operation.
Automatic operation can be overridden
by selecting the Off/On position ( ).
To reset to AUTO mode, turn the head-
lamp control switch back to On and then
back to AUTO. Automatic mode will also
reset the next time the vehicle is started
if the switch is in AUTO position.
See Section 3 of your Owner Manual.
Automatic Headlamp Control
Interior Light Control
To adjust the brightness of the interior
lights, turn and hold the interior light
control knob located on the left side of
the instrument panel. Push the knob in
to turn the lights on and off.
See Section 3 of your Owner Manual.
Auto Signal
The turn signal lever has two upward
and downward positions to signal a lane
change or a turn.
• To signal a lane change, raise or
lower the lever until the arrow on the
instrument panel cluster starts to
flash. Release the lever. The turn
signal will automatically flash three
times.