GM 2006 Corvette - Manual (Page 5)

5
Opening the Doors
To open the
doors, simply
touch the pad
located at the
rear edge of each
door. Once the
pad is pressed,
the doors unlock
and open if the
Keyless Access
transmitter is within three feet of the door.
See Section 2 of your Owner Manual.
Starting and Stopping
Your Engine
To Start the Engine:
• Depress the brake
pedal on automat-
ic transmission-
equipped vehicles
or the clutch pedal
on manual trans-
mission-equipped
vehicles.
• Press the top of the Start button,
located on the instrument panel to the
right of the steering wheel.
The engine will start if the Keyless
Access transmitter is in the car.
To Stop the Engine:
• Move the shift lever to Park (P) on
automatic transmission-equipped
vehicles or to 1st or Reverse (R)
on manual transmission-equipped
vehicles.
• Press the Off/ACC button (the bottom
part of the Start button).
See Section 2 of your Owner Manual.
Leaving the Vehicle
Open the door by pressing the button at
the front of the armrest. When exiting
the vehicle, take the Keyless Access
transmitter with you. You can lock your
vehicle using one of three methods:
• Lock the doors with the power door
lock switch located on the door panel,
step out, and close the door.
• Press the Lock button on the
transmitter after you step out of the
vehicle.
• Program your vehicle for Passive
Locking, covered in this booklet under
Personalization Features.
See Section 2 of your Owner Manual.
Opening and Closing the
Hatch/Trunk
Your Corvette provides three convenient
ways of opening the hatch/trunk:
• Touch the button located above the
license plate (the Keyless Access
transmitter must be within three feet
of the button).
• Press the Trunk Release button locat-
ed to the left of the steering wheel.
• Press the Trunk Release button on
the Keyless Access transmitter.
See Section 2 of your Owner Manual.